Toggle Nav 
- - A sliding rail, either 1.65m long with predrilled fixing holes for OPTOKIT, or 2.4m long with no predrilled fixing holes for OPTOEXTKIT, or no rail included for OPTOKITNR
- - 2 Rollers
- - 2 Anti-lift stoppers for rollers
- - 2 Door stoppers
- - 2 Rail fixing brackets (OPT5)
- - 2 Rail end fixing (Include extra buttons on each one so they can also be fixed onto return glass panels instead of walls if needed)
- - 1 Bottom door guide
- - 1 Pull handle for sliding doors
A frameless Sliding Shower Kit includes below list of components.
- - Wall to Wall configuration
- - Corner configuration
- - Phonebox configuration
The kit is capable of doing all below configurations.
With extra rail fixing brackets (extra can be purchased seperately with the kit), the sliding side can accomodate three panels with door in the middle.
To fix the rollers, roller anti-lift brackets and rail fixing brackets to glass, holes of various diameters need to be processed onto the glass panels. Below examples shows the hole requiremnets for the rollers and brackets on a standard wall to wall configuration with a door panel and a fix panel setup
** We do provide free glass breakdown service for our OPTO system, for all above configurations. Simply email us your overall tight measurements and we will email you back with the glass sizes and rail cutting recommendations in a PDF file
- Wall to Wall configuration
- Corner configuration
- Phonebox configuration
Below are the installation Steps for standard setups.